Need help? 251-680-7500 Mon–Fri · 7 AM – 4 PM
Generac
Certified Dealer · Mobile, AL

Whole House Generator Installation in Mobile, AL

When the grid goes down on the Gulf Coast, your house doesn't have to. Whole-home standby generators sized, installed, and serviced by licensed electricians — installed to code, guaranteed for a year.

Call (251) 680-7500
Save $500

$500 OFFYour Whole-House Generator

Plus a complimentary home electrical safety inspection with every installation estimate.

Applies to whole-home standby generator installations. No spam, ever — a licensed local tech follows up.

Storm Season Is a Fact of Life Here

Whole-Home Backup Power, Done by the Trade That Owns the Whole Job

Everyone in Mobile has a hurricane story, and most of them include the days after — no air conditioning in September heat, a freezer full of spoiled food, sump pumps dead when the rain keeps coming. A whole-house standby generator ends that story: it senses the outage, starts itself within seconds, and carries your home — AC included — until utility power returns.

We do this work every week. Recently it was a 25kW whole-home Generac in west Mobile. Before that, a big standby system for a vacation rental down in Gulf Shores. And every September the phone fills up with the same call — “generator won't start” — from Theodore, Fairhope, Satsuma. Nine times out of ten it's a unit nobody's touched since the day it went in. Professional Systems is a certified Generac® dealer, and generator installation is where our two licenses earn their keep. A standby installation is an electrical project (transfer switch, panel work, code compliance) wrapped around a mechanical one (pad placement, fuel connection, load management for your HVAC). We're licensed for the whole scope — no subcontractor handoffs, one crew, one warranty conversation.

Free, no-obligation estimates. Exact installed pricing in writing.

Call (251) 680-7500
Professional Systems crew completing a Generac whole house generator installation in Mobile, AL
Generac Guardian home standby generator installed beside a home
Generac logo
Sized Right, Not Sold Big

What Size Whole House Generator Does Your Home Need?

The right generator is a math problem, not a sales pitch. We run a load calculation on your actual home — air conditioning tonnage (the big one in Mobile), water heating, well or sump pumps, kitchen, medical equipment — and spec the kilowatt rating that carries what matters without paying for capacity you'll never use.

  • Essential-circuits setups (10–14kW) keep the refrigerator, lights, and select circuits alive at the lowest cost of entry.
  • Whole-home systems (typically 18–26kW for most Mobile homes) carry everything, including central AC — the difference between camping in your house and living in it.
  • Load-management options let a smaller unit run a larger home intelligently, staging big loads instead of oversizing the generator.

Fuel matters too: most of our installations run on natural gas where service is available, with propane as the standard alternative farther out. We handle the coordination either way.

Straight From Generac's Playbook

The Generator Sizing Cheat Sheet

Generac's own guidance, translated for Gulf Coast homes: size to your peak electrical load, not your square footage — and let load management do the heavy lifting.

Size Best Fit What It Carries
10–14kWSmaller homes & smart-managed setupsThe essentials — refrigerator, lights, internet, sump pump — with load managers able to prioritize the AC or a well pump as needed.
18–22kWThe mid-size whole-home sweet spotEveryday and comfort loads with heavy hitters managed intelligently — Generac calls 22kW the industry standard for whole-home coverage in this bracket, and it's our most-installed size in Mobile.
24–28kWLarger homes & heavy electric loadsDual AC systems, electric heat pumps, pools, shops, EV charging — full coverage with headroom, from the largest air-cooled lineup in the industry.
Mobile Link™ included on every Guardian® 5-year limited warranty on Guardian standby generators Quiet-Test™ low-RPM weekly self-test Natural gas or propane — your property's call

Sizing guidance and product specifications per Generac. Your exact number comes from our free on-site load calculation.

Everything In One Scope

What a Professional Systems Generator Installation Includes

Load Calculation & Sizing

Your real loads, measured — so the unit fits the house instead of the brochure.

Automatic Transfer Switch

The brains of the system, installed at your panel: it senses the outage, starts the generator, and switches your home over in seconds — no extension cords, no flipping breakers in the rain.

Code-Compliant Pad & Placement

Set clear of openings and property lines per code, anchored for hurricane-zone wind, with clearances that keep the warranty and the inspector happy.

Fuel & Electrical Connections

Gas coordination and every electrical termination handled by our own licensed team — the part of the job where cut corners hide.

Permits & Inspections

City of Mobile and Mobile County permits pulled, inspections passed, paperwork in your hand. Included, not extra.

Startup, Test & Walkthrough

We commission the unit under load, register your Generac warranty, and show you exactly how the system behaves before we leave.

From First Call to First Outage

Our Whole House Generator Installation Process

  • 1. Free in-home assessment. A licensed electrician surveys your panel, loads, gas service, and placement options — then quotes exact installed pricing in writing.
  • 2. Permits & scheduling. We pull the permits, coordinate fuel, and schedule installation around you. Most residential installs are completed in one to two days on site.
  • 3. Installation. Pad set, generator placed, transfer switch installed, gas and electrical connected — all by our own crew.
  • 4. Commissioning & warranty registration. Full test under load, weekly self-test schedule configured, Generac warranty registered for you, 1-year workmanship guarantee on our installation in writing.

After the install, the system exercises itself weekly and reports issues before storm season finds them — and the same local team that installed it services it. See our broader generator installation service for repairs and maintenance too.

Request Your Free Quote
Automatic transfer switch installation for a whole home generator in Mobile, AL
Whole home standby generator installed beside a Mobile, Alabama residence
Budget & Financing

What Whole House Generator Installation Costs in Mobile

Installed cost comes down to four things: the generator's kilowatt size, the transfer switch configuration, the gas work your property needs (existing natural gas line vs. new run vs. propane), and the condition of your electrical panel — older panels sometimes need an upgrade to accept a transfer switch cleanly.

Standing offer: $500 off whole-house generator installation, and every estimate includes a complimentary home electrical safety inspection — claim it with the form above or mention it when you call.

We quote the whole scope up front — unit, switch, pad, gas, electrical, permits — as one exact installed price in writing, with financing options that turn storm security into a monthly payment. When hurricane season is on the horizon, ask about lead times: demand spikes after the first named storm, and the calm months are the smart time to install.

Watch It Work

See a Generac Home Standby Generator in Action

Official Generac overview — 26 seconds.

Generac Mobile Link™

Your Generator, On Your Phone

Every system we install can include Generac's Mobile Link™ remote monitoring — see your generator's status, get maintenance alerts, and confirm its weekly self-test ran, all from your phone. When a storm is inbound and you're not home, that green checkmark is worth a lot.

Generac Mobile Link remote monitoring app showing generator status

Download Generac's Hurricane Prep Checklist (PDF)

20+Years on the Gulf Coast
4.9Google Rating
97Five-Star Google Reviews
1yrWorkmanship Guarantee
Local Knowledge

Generator Installers Who Know Mobile's Storms

The map tells the story: generator work from Citronelle and Satsuma down through Theodore and Grand Bay to Gulf Shores — and across the state line into Lucedale and Vancleave, Mississippi. We've installed standby power across every kind of property the Gulf Coast has: raised homes in Midtown where pad placement takes planning, waterfront properties on Dog River and the Eastern Shore where salt air drives enclosure and maintenance choices, and businesses along Airport Boulevard that can't afford a dark storefront. Hurricane-zone anchoring, flood-aware placement, and code clearances aren't special requests here — they're the default spec.

Professional Systems is headquartered at 216 E I-65 Service Rd N and serves the full metro: Mobile, Prichard, Saraland, Semmes, Theodore, Tillmans Corner, and across the bay in Daphne, Spanish Fort, and Fairhope.

Reviews

What Gulf Coast Homeowners Say

★★★★★

"Jerry and his team are prompt, trustworthy, and easy to communicate with. Jerry went out of his way to make sure I was taken care of very quickly! 10/10 recommend."

— Paul Kimsal, Daphne, AL
★★★★★

"I've worked with them on several projects and they are amazing to work with. Caleb has always been very responsive and keeps me informed of the status of each project."

— Jim Brock, Mobile, AL
★★★★★

"Professional Systems responded quickly, diagnosed an unusual problem, and got us running. Honest and skilled."

— David Atchison, Google review

Read More Reviews

Questions & Answers

Whole House Generators in Mobile — Frequently Asked Questions

How much does a whole house generator cost installed in Mobile?

It depends on the kilowatt size your load calculation calls for, the transfer switch configuration, the gas work your property needs, and the condition of your electrical panel. We quote the entire scope as one exact installed price in writing after a free in-home assessment — and financing is available.

Are you certified Generac installers?

Yes — Professional Systems is a certified Generac® dealer serving Mobile and Baldwin County. That means factory-backed equipment, installation to Generac's specifications (which is what keeps the warranty valid), and warranty service that runs through our local office.

What size generator do I need to run my whole house, including AC?

For most Mobile homes, whole-home coverage including central air lands in the 18–26kW range — but the honest answer comes from a load calculation, not a rule of thumb. Air conditioning is the dominant load here, and we're HVAC-licensed too, so we size around your actual system rather than a guess.

How fast does a standby generator kick in during an outage?

Typically within about 10 seconds. The automatic transfer switch senses the outage, starts the generator, and switches your home over on its own — whether you're home or not. When utility power returns, it switches back and shuts itself down.

Natural gas or propane — which is better here?

Where natural gas service exists, it's usually the answer: no tank to refill and effectively unlimited runtime. Properties without gas service run on propane with an appropriately sized tank. We handle the coordination for either, including new gas line runs when needed.

How long does installation take?

Most residential whole-house installations are completed in one to two days on site, once permits and equipment are in hand. Lead times stretch after named storms — the off-season is the smart time to schedule.

Do I need a permit for a generator in Mobile?

Yes — standby generator installations require electrical (and typically gas) permits and inspection in the City of Mobile and Mobile County, plus code-compliant placement and hurricane-rated anchoring. We pull the permits and see the job through inspection as part of every installation.

What maintenance does a whole house generator need?

The unit self-tests weekly on its own. Beyond that, annual service — oil, filters, battery, and a checkup before hurricane season — keeps it ready and keeps the warranty intact. The same local team that installs your generator maintains it.

Will a generator work with my existing electrical panel?

Usually yes. Occasionally an older or full panel needs an upgrade to accept the transfer switch cleanly — we evaluate that in the free assessment and quote it up front if it applies, and we do that work in-house too.

Something we didn't cover? See our full FAQ page or call (251) 680-7500.

Explore More

Related Electrical Services

Generator Installation Overview

Installation, repair, and maintenance for standby generators across the Gulf Coast.

View Service

Electrical Panel Upgrades

The foundation a transfer switch installs into — modern 200-amp service.

View Service

All Electrical Services

Panels, EV chargers, rewiring, lighting, inspections — the full electrical lineup.

View Services
Before the Next Storm

Ready for Power That Doesn't Blink? Get Your Free Generator Estimate.

A licensed electrician will size your home, walk your placement options, and give you one exact installed price in writing.

Call (251) 680-7500   Request a Quote
📞 Call Now $500 Off →